GW vertical pipeline sewage pump is easy to install and has a wide range of uses. It can be used as a general pipeline pump to supply pressurized water to high-rise buildings. It can also transport sewage containing granular fiber. In addition to conveying sewage, it is also suitable for drainage pump, filtration flushing condensate circulating pump, etc. This series of pumps adopts unique impeller structure and new mechanical seal, which can effectively transport solids and long fibers. Compared with the traditional impeller, the pump impeller adopts the form of single channel or double channel. It is similar to an elbow with the same cross-section size and has very good overcurrent. Equipped with a reasonable worm chamber, the pump has high efficiency. After the dynamic and static balance test of the impeller, the pump has no vibration in operation. Service conditions of pipeline non clogging sewage pump A. The service ambient temperature of pipeline sewage pump is ≤ 40 ℃, and the humidity is ≤ 95%; Altitude ≤ 1000m. B. The medium temperature shall not exceed 60 ℃, and the medium weight shall be 1 ~ 1.3kg/dm3. C. The application range of cast iron material is pH5 ~ 9. D. Stainless steel can use general corrosive media. E. The altitude of the operating environment shall not exceed 1000 meters. If it exceeds the above conditions, it shall be put forward at the time of ordering, so as to provide you with more reliable products. Note: if the user has special temperature, medium and other requirements, please indicate the details of the transmission medium when ordering, so that the unit can provide more reliable products. Product features of pipeline non clogging sewage pump 1. The pump and motor are directly connected and coaxial. It is an electromechanical product with compact structure and stable performance. 2. The design of anti clogging hydraulic components with large flow channel greatly improves the dirt passing capacity, and can effectively pass through fiber materials with 5 times the diameter of the pump and solid particles with a diameter of about 50% of the diameter of the pump. 3. The design is reasonable, the supporting motor is reasonable, the efficiency is high, the noise is low, and the energy-saving effect is remarkable. 4. The mechanical seal adopts hard wear-resistant tungsten carbide, which is durable and wear-resistant, and can make the pump operate safely and continuously for more than 8000 hours. 5. The pump is a vertical structure, the inlet and outlet center lines are on the same horizontal line, and the inlet and outlet flanges have the same specifications, which is very convenient for installation and disassembly. 6. The floor area is small and there is no need to build a computer room, which can save a lot of capital construction costs; Add a protective cover at the fan blade end of the motor, and the whole machine can be placed outdoors.
Related products: